Pros And Cons Of Whirlpool Microwave Not Working…

Whirlpool is renowned for producing premium microwave ovens and a range of high-quality household appliances that have gained popularity among consumers worldwide. Nonetheless, even the finest products may experience malfunctions and cease functioning.

If you happen to own a Whirlpool microwave that isn’t working correctly, it could be due to various potential issues. The primary aim of this guide is to outline the most prevalent problems and provide you with a detailed set of instructions on how to rectify them.

This guide is applicable to the following Whirlpool microwave models:

  1. 7MT7116XDQ0
  2. 7MT7118XDQ0
  3. CMT061SGW0
  4. CMT101SGW0
  5. CMT102SGW0
  6. GH7145XFB0
  7. GMH3204XVB2
  8. GMH3204XVB3
  9. GMH3204XVQ2
  10. GMH3204XVQ3
  11. GMH3204XVS2
  12. GMH3204XVS3
  13. WMH1163XVB1
  14. WMH1163XVB2
  15. WMH1163XVD1
  16. WMH1163XVD2
  17. WMH1163XVQ1
  18. WMH1163XVQ2
  19. WMH1163XVS1
  20. WMH1163XVS2
  21. WMH1163XVS6

How to Fix a Whirlpool Microwave

Check the Power Source

Let’s begin with the initial step: ensuring that the power source for your microwave is functioning properly. You can perform this by following these steps:

  1. Examine your household fuse box and ensure that the circuit breaker responsible for supplying power to your kitchen is in the “on” position. If it’s not, switch it on.
  2. Carefully inspect all the fuses. If you come across a blown fuse, you’ll need to replace it.

Check the Turntable

The following step involves inspecting the turntable in your Whirlpool microwave. To do this, follow these steps:

  1. Turn your microwave on (use any cycle) and carefully observe the turntable to check if it’s rotating. If it is indeed rotating, then this isn’t the root cause of the issue, and you should proceed to the next component for inspection.
  2. However, if you notice that the turntable is not rotating, proceed as follows:
    • If possible, remove the rollers and hubs from the turntable.
    • Thoroughly clean these components.
    • Reassemble all the components, ensuring that the turntable is correctly positioned on the turntable support.
  3. If, after cleaning and reassembling, the turntable still does not rotate, you’ll need to replace the turntable components.

Pros and Cons Of Whirlpool Microwave


  • Reliable Brand
  • Wide Range of Models
  • Innovative Features
  • User-Friendly Controls
  • Efficient Heating


  • Limited Warranty
  • Noise Level
  • Complex Features
  • Repair and Maintenance

Differences Between Whirlpool Microwave and Bosch Microwave


Whirlpool microwaves offer a variety of features, including sensor cooking, convection cooking, and steam cooking options. They tend to prioritize user-friendly controls.


Bosch microwaves are known for their advanced technology and precision. They may include innovative features like European convection, speed cooking, and more, often catering to users who seek high-performance appliances.

Alternative to Whirlpool Microwave

Panasonic Microwave

Panasonic microwaves are known for their heating and advanced inverter technology. They are available in various sizes and styles.

Check the Display Messages

Moving forward, it’s essential to check for display-related issues that can be easily resolved. Begin by:

  1. Resetting the Clock:
    • Press the “clock” key on your microwave.
    • Use the number keys to set the correct time.
    • Press the “clock” key once more to confirm and set the time.
  2. Ensure the Microwave Isn’t in “Locked” Mode:
    • Check the display, and if it shows “Locked,” the microwave is in lock mode.
    • To unlock it, press and hold the “off” key for five seconds.
    • Once unlocked, you should be able to use the microwave as usual.

Check the Line Fuse

If you haven’t resolved the issue with the above steps, you can proceed to check the line fuse. The line fuse can lead to a microwave malfunction when excessive current flows through the circuitry, causing the fuse to blow. Here’s how to check the line fuse:

  1. Safety First:
    • Unplug the microwave from the wall to ensure your safety during the inspection and repair.
  2. Access the Line Fuse:
    • Carefully remove the microwave’s case or cabinet to access the internal components. Locate the line fuse within your microwave.
  3. Check Fuse Continuity:
    • Utilize a multimeter to test the fuse for continuity.
    • If the fuse shows continuity, it means it is not blown and is not the cause of your problem.
    • If the line fuse lacks continuity, it needs to be replaced. However, it’s crucial to identify the root cause of the problem to prevent future fuse blowouts.

IMPORTANT WARNING: Repairing microwaves can be extremely hazardous and should only be attempted by individuals with the proper training. Microwaves store thousands of volts of electricity in their capacitors even after being unplugged, posing a high risk of electric shock. If you’re not experienced in microwave repair, it’s recommended to seek professional assistance to ensure your safety.

Check the Thermal Fuse

The thermal fuse is a safety feature that cuts off power to the microwave in case of overheating. To check the thermal fuse, follow these steps:

  1. Safety First:
  2. Check Thermal Fuse Continuity:
    • Use a multimeter to test the thermal fuse for continuity.
    • If the thermal fuse lacks continuity, it needs to be replaced. Note that it is not possible to reset the thermal fuse once it blows.
  3. If Thermal Fuse Has Continuity:

IMPORTANT WARNING: Microwaves are exceptionally dangerous to repair due to the high voltage stored in their capacitors, even after being unplugged. There’s a substantial risk of electric shocks. It is strongly recommended that only licensed technicians or qualified professionals attempt to test and replace electrical components in microwaves to ensure safety.

Check the Thermoprotector

Another critical component to inspect is the thermoprotector, which serves to interrupt the voltage to the microwave in the event of overheating. Here’s how you can check the Thermo protector:

  1. Prioritize Safety:
    • Ensure the microwave is completely unplugged from its power source to prevent any electrical risks.
  2. Check the Thermoprotector:
    • Use a multimeter to check if the thermoprotector has continuity.
  3. Addressing No Continuity:
    • If the thermoprotector does not exhibit continuity, you can attempt to reset it. If a reset doesn’t resolve the issue, you will need to replace the thermoprotector.
  4. Thermo protector with Continuity:
    • If the thermoprotector maintains continuity, it is functioning correctly and does not require replacement.

IMPORTANT WARNING: Repairing a microwave can be dangerous due to the risk of electric shock, as microwaves store high voltages in their capacitors, even when unplugged. It is highly recommended that only licensed technicians or qualified professionals handle the testing and replacement of electrical components in microwaves to ensure safety.

Replace the Main Control Board

The final component to consider if you’ve exhausted all other options and still can’t identify the cause of your microwave’s malfunction is the main control board. While it’s relatively uncommon for the main control board to be the root cause, it can sometimes be the issue.

If you’ve gone through all the previously recommended solutions and the problem persists, replacing the main control board may be necessary.

IMPORTANT WARNING: Microwaves are exceptionally hazardous to repair if you lack the proper training. They store high voltages of electricity in their capacitors, even after being unplugged, which poses a significant risk of electric shock.

Therefore, it is strongly advised that only licensed technicians or qualified professionals undertake the testing and replacement of electrical components in microwaves to ensure safety.


When faced with a Whirlpool microwave that is not working, there are several potential issues to consider. We’ve covered various troubleshooting steps in this guide to help you identify and rectify the problem.

It’s important to ensure your safety by following proper precautions and consulting licensed technicians when dealing with electrical components, as microwaves can store high voltages of electricity in their capacitors, even when unplugged.

By following the steps outlined here, including checking the power source, examining the turntable, assessing the display, and inspecting components like the line fuse, thermal fuse, thermoprotector, and main control board, you can systematically diagnose and potentially resolve the issue.

Remember that safety is paramount, and it’s essential to exercise caution when attempting any repairs or replacements within your microwave. If you’re uncertain or uncomfortable with these procedures, it’s always advisable to seek professional assistance. Your well-being is a top priority in addressing the “Whirlpool Microwave Not Working” issue.

#Pros #Cons #Whirlpool #Microwave #Working..

Leave a Reply

Your email address will not be published. Required fields are marked *